45
◆
MOTION : This can detect the movement of a subject and you can see the moving image of the subject on the monitor
when the camera detects it. In the state of Motion Detection On, a new submenu below appears when you press the Set
button.
- SELECT : You can designate areas up to a maximum of 4.
- DISPLAY : After the selection of an area, the area screen should be activated On to use the motion detection function in a
designated area. When this is activated, you can select the location of area, a size of area coverage.
- SENSITIVITY : The higher the setting value is, the higher the sensitivity gets, even though the movement of a subject.
- COLOR : In motion detect situation, you can select block and outline color (Red, Green, White, Blue)
- TRANS : In motion situation, you can select the level of transparency.
- ALARM : In motion situation, you can select the detail of option setting.
- DEFAULT : Return to default setting value.
◆
PRIVACY : This is used to hide certain areas on the monitor. You can designate each different 8 area. The size of a
designated area can be adjusted. The color of a privacy area can be selected 15 colors. When you select the return, the
setting values in this function menu are saved, then get out of this menu.
◆
LANGUAGE : ENG, CHN1, CHN2, GER, FRA, ITA, POL, RUS, POR, NED, TUR, KOR, JPN, HEB, ARB
◆
DEFECT : You can eliminate white spots (defect) up to max.2048 points.
Black spots up to max.128 points.
→
LIVE DPC : Realtime dead pixel compensation.
→
WHITE DPC : Manually white dead pixel compensation.
PRIVACY
DEFECT
1.SELECT
2.DISPLAY
3.COLOR
4.TRANS
5.DEFAULT
6.RETURN
1.LIVE DPC
2.WHITE DPC
3.BLACK DPC
4.RETURN
AREA1
OFF
BLACK
1.00
RET
ON
ON
OFF
RET
EN
