42
NR
This function makes the noise of the low light background decrease and is the most highlighted feature using NR DSP chip.
1. Move the triangular indicator to NR by using the Up or Down button.
2. Select the mode to use by pressing the Right or Left button.
3. Adjust the most available proportion of compensation with the ambient environment by changing the NR mode pressing
the Set button.
◆
2DNR : Edge preserving & flat area noise reduction.
◆
3DNR : Motion adaptive noise reduction.
- Based on noise variance from AGC value.
- Adaptive level control by noise level
* If NR function is used, the cancellation effect of noise is excellent. The higher the compensation proportion
raise, the better the effect of noise cancellation is, but the ghost effect may be occurred.
NOTE
MAIN MENU
1.LENS
2.EXPOSURE
3.BACKLIGHT
4.WHITE BAL
5.DAY&NIGHT
6.NR
7.SPECIAL
8.ADJUST
9.RESET
10.EXIT
DC
OFF
ATW
EXT
SAVE&END
NR
1.2DNR
2.3DNR
3.RETURN
LOW
MIDDLE
RET
MANUAL
MAIN MENU
1.LENS
2.EXPOSURE
3.BACKLIGHT
4.WHITE BAL
5.DAY&NIGHT
6.NR
7.SPECIAL
8.ADJUST
9.RESET
10.EXIT
DC
OFF
ATW
EXT
SAVE&END
NR
1.2DNR
2.3DNR
3.RETURN
LOW
MIDDLE
RET
MANUAL
EN