Vimar 01546, Руководство по установке

Страница: 17 / 21

17
VIMAR group
COMMUNICA
TION OBJECTS
ETS parameters and communication objects
KNX weather station
ETS text
Available values
Comment
[
Default value
]
Output activates with
LV upper = ON |
LV - lower hyst. = OFF
LV lower = ON |
LV + lower hyst. = OFF
[LV upper = ON |
LV - lower hyst. = OFF]
Control output communica-
tion object LV 1 twilight
Do not send
Send with change
Send reversed with
change
Send with change and
cyclically
Send reversed with
change and cyclically
[Do not send]
Note: If the threshold value is set by a communication object,
the threshold value must be specified during configuration
because this value remains valid until the 1st object is sent
with the new threshold value.
In the case of weather stations that have already been put into
service, the last threshold value sent by the communication
object is used.
If a threshold is set once using the parameter or a
communication object, the last set threshold value remains
until a new threshold value is transmitted by a communication
object.
The last threshold values set by the communication objects
are saved in EEPROM memory, so as to preserve the values
during a power failure that are then available when power is
restored.
Logics
ETS text
Available values
Comment
[
Default value
]
Logic 1
off
on
[off]
Logic 2
off
on
[off]
Logic 3
off
on
[off]
Logic 4
off
on
[off]
Logic 5
off
on
[off]
Logic 6
off
on
[off]
Logic 7
off
on
[off]
Logic 8
off
on
[off]
Logics