Viltrus Electronics MX-7, Руководство пользователя, Страница: 43 / 87

44
Manufacturer’s number (see chapter 3.2). To setup Serial interfaces, you need to do few steps:
7.8.1 Setup UART’s
Data logger supports up to 8 UART’s and each of them can be configured individualy:
•
Connection speed (300-38400 bit/s);
•
Parity (Even, Odd, Mark, Space, None);
•
Data bits (5, 6, 7, 8);
•
Stop bits (1,1.5,2);
Packetization:
•
Time – in field “Packet time” you can set packet interval (1 – 10000) msec;
•
Symbol – if you use this packetization method, you need to write “Packet symbol” in
HEX format;
•
Length – if you select this packetization method, you need to write number of bytes per
packet in field “Packet byte count”;
•
“>1b+time” – is connecting packetization of methods “Length” and “Time” and you
need to write values to the fiels “Packet time” and “Packet byte count”. End of packet