Villager VLP 5420, Оригинальное руководство пользователя, Страница: 39 / 224

15
Villager VLP 5420 (GB)
Fig. 2
Fig. 1
PREPARING THE IMPACT DRIVER
BATTERY PACK CHARGING - FIGS. 1 - 2
Important: Only Villager 18V designated
battery packs and chargers can be used
in conjunction with this product. Use of
any
other third party battery
packs/chargers with this product is
considered misuse and will invalidate the
product’s warranty .
Warning! Check the condition of the
charger and battery prior to each charge.
If there is any sign of damage then do
not commence charging, seek advice
from Villager Tools.
The battery pack is supplied un-charged
and must be charged before initial use.
To charge the battery pack (8), it must
first be removed from the tool.
To release the battery pack:
-
Press the battery release button (7)
and gently slide the battery pack off
(Fig.1).
- Plug the battery charger (9) unit into
a 230V/AC supply socket.
- The red LED (9.1) will illuminate to
show the charger has power.
- Slide the battery into the charger (the
battery is shaped to fit into the
charger one way only).
- After a few seconds delay, the red
LED (9.1)will flash to show that
charging has begun, then illuminate solid red.
- Whilst the battery is charging, the green LED (9.2) will flash, (the red LED will go
from flashing to constant red).
- When the battery is fully charged when the green LED stops flashing and
remains a constant green. The red LED will extinguish.