Villager Villybot 1.1, Оригинальное руководство пользователя

Страница: 32 / 229

8
Villager Villybot 1.1 (GB)

Never make perpendicular (90°) corners. The corners must be minimum 100°
(please see drawing).

The boundary wire must be placed 10 - 30 cm from the borderline of the lawn.
10 cm is required if the adjacent surface is in the same level (for instance tiles),
20 cm in case of a firm edge and 30 cm in case of a soft edge, e.g. beds with
bushes and other vegetation where the robot mower may get stuck.

Make islands by encircling obstacles, e.g. flowerbeds, with boundary wire if you
do not want your robot to mow within this area. The ingoing and outgoing cable
must be maximum 5 mm from each other.

Stones may be hit without a problem by your robot mower if they are heavy
enough that the robot does not move them. If, however, the stone has a sloping
surface, which the robot may accidentally climb, you should remove the stone
from the working area or place it vertically with a minimum height of 15 cm.

If you have trees with roots emerging from the ground these areas should be
encircled by boundary wire to protect the trees. If there are no visible roots, no
boundary wire is necessary.

In case the boundary wire is placed under low-hanging branches from bushes or
trees, you must prune the branches so that they do not hinder the free running
of the mower. At the same time these branches may cause the activation of the
rain sensor if rain drops from the branches hit the machine. In that case the
machine will return to the docking station even in dry weather (rain sensor
symbol is shown on the display).
0,3 m
min 2 m
min 1 m
min 2 m
Corner min 100°
>
min 1 m
min 0,6 m
5 mm between wire