Villager Villy 1800 P, Оригинальное руководство пользователя, Страница: 27 / 142

Villager Villy 1800 P (GB)
12
Replacing the blade
Always disconnect the power plug and check on the run-on display that the
motor is off before you inspect the blade.
CAUTION!
Remember that the blade will continue to rotate for a few seconds
even after the motor has been switched off. Never try to stop the blade. Make
sure at regular intervals that the blade is securely attached, in good condition
and sharp. Sharpen or replacement as and when necessary.
If the blade strikes an object while mowing, stop the lawnmower and wait until
the blade has come to a standstill. Then check the condition of the blade and
the blade fixing screw. If these have been damaged or loose, they must be
replaced immediately.
Important: Wear safety gloves for this job. Loosen the 2 hex bolts by turning
anti-clockwise with a 6mm hex key wrench, take off the blade and replace it
with a new one, making sure the direction of installation is correct. Tighten the
plastic nut of fixing screw by turning clockwise. At the end of the season,
perform a general inspection of your lawnmower and remove any grass and
dirt which may have accumulated.
At the start of each season, check the condition of the blade, the connection
cable and all electrical connections.
If repairs are necessary, please contact one of our customer service centres.
Use only original spare parts for maintenance work.
Storage:
Always clean your mower before storage. Store your mower in a clean, dry
environment. To avoid mould on remaining contents, make sure the grass
collect bag is empty and dry. You can fold the handle to save space, loosen the
2 clamps on each side of the handle and bend the upper handle part towards
the front of the machine.
Long time storage: apply some environmentally friendly oil on the mower blade
to prevent it from rusting.
Hibernation: have your blade sharpened after mowing season, so your machine
is ready for the new season.