Villager Villy 1800 P, Оригинальное руководство пользователя, Страница: 23 / 142

Villager Villy 1800 P (GB)
8
-Always keep the electrical supply cable away from the blades and be aware of
its position at all times.
-The extension cable should always be secured firmly on the supporting hook
(situated at the top of the handle pipe) to prevent it from being damaged while
the mower is in use.
-Never carry your machine by the cable or jerk the cable to separate the
connectors. Keep the cable away from heat sources, oils or sharp edges. Check
the condition of your cable before use and do not use if damaged.
-Your machine should always be switched off at the electrical supply, before
disconnecting any plug and socket connector, or extension cables.
-
WARNING: do not use an extension cable which shows signs of damage. Fit a
new cable complete-do not make any permanent or temporary repairs .
Pull the plug from the socket:
-Whenever you leave the machine.
-Before clearing a blockage.
-Before checking, cleaning or working on the appliance.
-After striking a foreign object. Inspect the appliance for damage and make
repairs as necessary.
-If the appliance starts to vibrate abnormally (check immediately).
ASSEMBLY
Some parts of the lawnmower have been dismantled for transport purpose. 2
Knobs, 2 Square bolts and 2 Limit wire clip are to be found in plastic bags. Grass
lead board, collect
grass assembly, Bracket and Grass box’s cover are in the box
Assembly is simple if you follow these instructions.
Fitting/ Removing/Emptying Grass collect bag
- Insert the handle into the Grass box’s cover. See Fig 2 -1.
- Assemble the left part and the right part of the Grass box together.
See Fig 2-2.
- Insert the Grass box’s cover into the Grass box, then turn around. See Fig 2 -3.
- Hook the Grass box’s cover and the Grass box. See Fig 2 -4.
- Insert Grass lead board into the Grass box. See Fig 2-5.
- Lift the guard (9) and hold up, fit the grass box (16). See Fig 2-9.
- Lift the guard (9) and hold up. Remove grass box (16).
For non-grass collection the mower can be used without the grass box (8) in
position, with the deflector guard (9) in the down position.
Handle
- Rotate the tube (8) and lock the knob (15) (one on each side). (See Fig 2-6 and
Fig 2-7).