6
Villager
VHW 100 – VHW 120 (EN)
WARNING:
Always switch off the mains disconnecting switch when leaving the
machine unattended.
OPERATING INSTRUCTIONS
This unit is to be connected to a cold water source
ONLY
.
The motor of this pressure washer will NOT run. It will only operate when the
trigger is squeezed.
-
Connect the outlet hose to the washer and connect the spray gun to the outlet
hose.
-
Connect nozzle and nozzle extension.
-
Check gauze filter is clear of any blockage.
-
Connect the water supply hose.
-
Check that the hose has no kinks in it.
-
Turn on water and check for leaks.
-
Depress trigger to allow air to be expelled though the pump and hoses, lock
trigger.
-
Plug in machine and turn on switch.
-
Unlock trigger and use the pressure washer.
Shut down
1. Turn off the motor (push switch to the off position).
2. Unplug the unit from the power source.
3. Turn off the water supply.
4. Press the trigger of the gun to depressurize the system.
5. Disconnect the garden hose from the pressure washer.
6. Wipe all surfaces of the unit with a damp clean cloth.
7. Engage the gun safety lock.
CAUTION:
ALWAYS turn off the unit’s motor BEFORE turning off the unit’s water
supply. Serious damage could occur to the motor if the unit is run without water.
CAUTION:
NEVER disconnect the high-pressure discharge hose from the machine
while the system is still pressurized. To depressurize the unit, turn off the motor,
turn off the water supply and squeeze the trigger 2-3 times.
Содержание VHW 100
Страница 84: ......