Villager VGI 2400, Руководство пользователя, Страница: 50 / 297

18
Villager VGI 2400 (GB)
Parallel
box
AC Parallel Operation
It is possible to connect two same (this type and model) generators to each other,
using a parallel cable kit, to increase available power output.
•
Connect PARALLEL OPERATION CABLES to two this same generators according
to the instructions provided with the cable kit.
•
Make sure the Economy switch is in the same position on both generators.
•
All electronic devices should be turned “OFF” and disconnected from
generators prior to starting generator engines.
•
Start generator engines. Make sure the green output indicator light comes on
for each generator.
•
When engines have stabilized, plug in electronic device to AC receptacle and
turn on first load.
•
Allow generator output to stabilize (engine and attached devices run evenly)
before plugging in the next load.
Maximum Power in Parallel Operation: 4,2 kVA
Rated Power in Parallel Operation: 4,0 kVA
Limit operation time to 3 seconds for load
requiring maximum output. For continuous
operation, do not exceed the rated output.
Note: It is strongly recommended to plug in
devices with the largest output first and the
smallest output last to help prevent
overloading the generator.
Only connect electronic devices to the generator that are in
good working order and do not exceed the rated power supply
of the parallel generators or the desired receptacle.
•
A faulty appliance or power cord can create an electric shock. Do not use
electronic devices that have a damaged cord or plug.
•
If an appliance begins to operate abnormally, becomes sluggish, or stalls, turn
off and disconnect appliance immediately. The appliance may have a fault or its
rated load capacity exceeds the power supply of the generator.
•
To avoid damage to generator or electronic device, do not connect a load to the
generator if its electrical rating exceeds that of the receptacle.