Villager ET 355, Оригинальное руководство пользователя, Страница: 30 / 166

Villager ET 355 (GB)
SERVICING
1.
TROUBLESHOOTING
If the trimmer does not work, check the connections to determine if the tool has
been properly connected to the power source.
If the blade does not cut properly, check the length of the cutting line, and if
necessary, lengthen or replace the cutting line.
The trimmer does not contain any parts which can be replaced by the user. If any
of the parts does not work, please contact the authorized service centre
recommended by the seller of the product.
It is recommended to plug the trimmer into an outdoors electrical outlet, so as to
prevent potential injuries.
PLUG REPLACEMENT
Your trimmer comes in an original box with an original plug. In case you need to
replace the plug, please follow these instructions:
WARNING: Mains cables are colored as follows: blue – neutral, brown – live
(active).
It is possible that the colored parts of the cable are not marked in your plug. If
that is the case, please do the following:

The blue-colored cable should be connected to the part marked with N or
colored black.

The brown-colored cable should be connected to the part marked with L or
colored red.

This should not refer to the grounding.

If it is necessary to use higher voltage power supply, or one which equals
5A, please use an additional safety circuit.