Villager ET 355, Оригинальное руководство пользователя, Страница: 23 / 166

Villager ET 355 (GB)
3.
Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control. Do not let untrained persons touch the power
tool or the mains cable.
4.
Store idle power tools in a safe place. The place for storing your power tool
must be dry, clean, closed and high, so it is out of the reach of children.
5.
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it
was designed.
6.
Use the correct accessories and attachments, the ones which are intended to
be used with your power tool. Do not use inadequate accessories and parts
which are not original with your power tool.
7.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
8.
Use additional safety equipment. You should always use safety goggles and
hearing protection. In some cases, it is necessary to use the dust mask as well.
9.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep the cord away from heat, oil, sharp edges or moving
parts
. Damaged or entangled cords increase the risk of electric shock.
10.
Take proper care of your power tool! Keep your power tool clean to ensure
safe and better use and keep following the instructions when it comes to
lubrication or oil change. Inspect the extension cords occasionally and have
them replaced if they are damaged. Keep the handgrip dry, clean and grease-
free.
11.
Clean the power tool before servicing. Make sure that the power tool is turned
off and remove the accessories before servicing.
12.
Avoid leaving the power tool on when it is not in use. Always make sure that
the trigger switch is in the OFF position before connecting the tool to the
power source.
13.
Use extension cords only if you work outdoors.
14.
Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not operate the power tool if you are tired.
15.
Inspect all the parts of the power tool. Maintain your power tools with due
care. Make sure that the moving parts operate perfectly and that they do not
jam, also inspect for any damage or breakage that may affect safe power tool
operation. Have the damaged parts fixed before the next use. Check for