Villager AGM BG 125, Оригинальное руководство пользователя

Страница: 26 / 31

10
AGM BG 125 (GB)
Installation
The grinder must be firmly bolted to a workbench. The length of the fixing bolts
will depend on the thickness of the workbench. If the workbench is made of steel,
it is advisable to use a wooden block or plank between the grinder and the bench,
to insulate it and prevent vibration.
Assembly and adjustment of eye shield bracket and eye shield (Fig B)
Attention! The eye shield bracket and eye shield should only ever be
assembled/adjusted with the grinding wheel stationary, and the machine
disconnected from the power supply).
•
Fix the eye shield bracket with attached eye shield to the grinding wheel cover,
using the screw provided.
•
Set the eye shield bracket at the correct height. The clearance between the
wheel and the eye shield bracket should be 1 to 1.5 mm.
•
Next tighten the screw firmly.
•
Position the eye shield to give maximum protection when working.
•
Always wear safety glasses.
Fitting and adjusting tool rest (Fig C)
Attention! The tool rest should only be adjusted when the grinding wheel is
completely stationary, and the machine is disconnected from the power supply
(the wall socket).
•
Fit the tool rest as shown in Fig. C.
•
Fix it as tightly as possible in position, with a maximum clearance (C) of 1 to 1.5
mm between the tool rest and the grinding wheel.
Fig B