Villager AGM BG 125, Оригинальное руководство пользователя

Страница: 27 / 31

11
AGM BG 125 (GB)
Replacing the grinding wheel (Fig D)
Attention! Only ever replace the grinding wheel when the motor is at a standstill
and the power is completely disconnected.
•
Remove the grinding wheel guards using the tools listed above. The spindle nut
on the right-hand side has a right-handed thread. The spindle nut on the left-
hand side has a left-handed thread. Keep this in mind when you are replacing
the grinding wheels.
•
Loosen the nut using the correct spanner. Remove the old wheel from the
spindle.
•
Clean the flanges. Place one flange (A) back on the spindle, with the hollow side
facing the grinding wheel. Slide the new wheel onto the spindle. Place the
second flange (A) on the spindle, again with the hollow side facing the grinding
wheel. Now tighten the nut on the spindle. Do not overtighten! Now refit the
grinding wheel cover, and again adjust the tool rest correctly. Run the motor
briefly, without grinding.
Fig C
Fig D