© 2009 Viking Preferred Service
20
Induction/Radiant Cooktop
(continued)
7.
Disconnect front inductor connections, pan
sensor and indicator board from upper power
board.
8. Remove front inductor.
9. Disconnect rear inductor ground screw.
10. Disconnect rear inductor connections, pan
sensor and indicator board from lower power
board.
11. Remove rear inductor.
12. Remove six screws on top, two screws on side
of upper filter/power board cover.
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit, unless
test procedures require power to be connected. Discharge capacitor through a resistor before attempting
to service. Ensure all ground wires are connected before certifying unit as repaired and/or operational.
Service Diagnostics and Procedures–Disassembly
Power
Connections
Surface
Temperature
Sensor
Connection
Ground Screw
Power
Connections
Surface
Temperature
Sensor
Connection
