6
9.
Pull end of nylon cord around refrigerator side level with top of
refrigerator door. Tape cord in place.
10.
Roll refrigerator into cutout to within 3” (7.6 cm) of being flush with
kitchen cabinets. To avoid kitchen cabinet damage, place
cardboard between kitchen cabinets and refrigerator. Push
cardboard back with refrigerator and remove cardboard when
refrigerator is in place. Remove power cord slack by pulling nylon
cord straight out while pushing refrigerator completely into place.
Power and nylon cords will rest along refrigerator side.
11.
Level refrigerator by turning front and rear leveling wheel bolts
clockwise to raise refrigerator and counterclockwise to lower
refrigerator. Rotate leveling feet until firmly in place against floor.
12.
Align refrigerator with sides of kitchen cabinets by adjusting
leveling wheels.
13.
Remove the 8 screws holding the grill assembly. Remove the grill
assembly and set aside.
14.
Screw lag bolts securely into mounting board using a magnetic 6”
extension socket. See Diagram A on page 3.
15.
Push extra nylon cord in along side of refrigerator out of sight, or
cord can be flush refrigerator.
16. Replace the grill assembly.
Nylon
Cord
Lag Bolts
Wall Stud
Wall Board or Plaster
Mounting
Board
Access to
Lag Bolts
Lag Bolt with
Extended Shaft
Lag Bolt
mounting
2 X 4 to
wall
Leveling Wheel
Bolts
Leveling Feet
