INSTALLATION
INSTRUCTIONS
BUILT-IN BOTTOM MOUNT REFRIGERATOR
VIKING RANGE CORPORATION
111 Front Street
Greenwood, Mississippi (MS) 38930 USA
(601) 455-1200
IMPORTANT - PLEASE READ AND FOLLOW
Make sure that incoming voltage is the same as unit rating. An electric rating plate specifying voltage, hertz, wattage, amps,
and phase is attached to the product.
To reduce the risk of fire, electric shock, or injury to persons, installation work and electrical wiring must be done by qualified
people in accordance with all applicable codes and standards, including fire-rated construction.
GENERAL INFORMATION
EXCESSIVE WEIGHT HAZARD
Use two or more people to move and install refrigerator.
Failure to follow this instruction can result in back or other injury.
Most of the refrigerator’s weight is at the top.
Extra care is needed when moving the
refrigerator to prevent tipping. Keep
cardboard shipping piece or plywood under
refrigerator until it is installed in the operating
position.
It is your responsibility to :
-comply with installation specifications and dimensions
-properly install refrigerator
-make sure that you have these materials which are necessary for proper installation:
1/4” (6 mm) copper tubing with shutoff valve
1/4” (6mm) compression fitting
-assure that floor will support refrigerator (more than 600 lbs. [272 kg.]), door panels and contents
-provide a properly grounded electrical outlet
-assure that location will permit appliance doors to open 90
o
minimum
