Viking Oxeo, Руководство по установке и обслуживанию

Страница: 27 / 238

Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
21
Marking of the extinguishing zones
The operator must mark the extinguishing zones of the system to point out the presence of the
fire extinguishing system and the involved risks.
Signs for both Nitrogen and Argon systems are available (Nitrogen pictured below). Signs are
available in English, Spanish, and French.
FIGURE 2-1: Marking of the extinguishing zones
Non-toxic, non-flammable gas under pressure
This hazard pictogram indicates containers with gases under pressure, which can explode if they
are heated.
Inhaling high concentrations of these gases is hazardous to a person's health.
Protect the containers from tipping over and falling down as well as from heating, impact, and
shock.
210 N. INDUSTRIAL PARK DR.
HASTINGS, MI 49058, USA
PN 24588
9#40+0)
This area is protected by a Viking Nitrogen
fire suppression system.
When the fire alarm sounds, or in the event
of a FIRE and system discharge,
EVACUATE hazard area immediately and
DO NOT re-enter until area is thoroughly
ventilated.
System must be disabled during
maintenance.
N
ITROGEN
IG-100
210 N. INDUSTRIAL PARK DR.
HASTINGS, MI 49058, USA
PN 24587
9#40+0)
This area is protected by a Viking Nitrogen
fire suppression system.
In the event of a FIRE and system
discharge, CAUTION must be taken to
avoid exposure to products of combustion.
DO NOT enter without an approved
self-contained breathing apparatus or until
area is thoroughly ventilated. System must
be disabled during maintenance.
NITROGEN
IG-100