manualshive.com logo in svg

Viking Oxeo, Руководство по установке и обслуживанию


Поделиться
Скачать
background image

Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en

13

Falling and flying objects

Noise

Effects of cold

WARNING   Risk of injury from falling and flying objects.

The discharge velocity of the extinguishing agent may cause objects to tip over or 
become airborne or to be damaged. This can cause severe injuries and significant 
material damage.

• Do not place any loose objects into the discharge zone of the discharge nozzles.

• Exit the extinguishing zone without delay and within the pre-discharge timer when an alarm 

is given.

• Do not place any sensitive objects (e.g. hard drives) directly into the discharge zone of the 

discharge nozzles.

WARNING   Risk of injury from noise.

High sound pressure levels caused by discharged gas and acoustic alarm equipment 
(e. g. signal horns) may cause hearing damage.

• Leave the extinguishing zone without delay and within the pre-discharge timer when an 

alarm is given.

• Stay out from the immediate vicinity of acoustic alarm equipment and discharge nozzles.

NOTICE   

Property damage from cooling ambient air.

The discharged extinguishing agent extracts heat from the ambient air contained in the 
extinguishing zone. This causes the air in the immediate discharge zone of the extinguish-
ing nozzles to cool to below -58 °F (-50 °C).

• Do not attach/store components that are sensitive to cold in the immediate vicinity of the dis-

charge nozzles.

Содержание Oxeo















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Oxeo

Бренды по названию

Популярные бренды

Загрузить еще бренды