EN
ES
17
PT
NO
SV
FI
DA
EL
BG
UK
0478 121 9803 A - EN
This machine is intended for operation with
a power supply having a system
impedance of Z
max
at the transfer point
(house connection) of maximum
0.49 ohms
(at 50 Hz).
The user must ensure that the machine is
only operated with a power supply which
meets this requirement. If necessary, this
information can be obtained from the local
electric power company.
1
0.2 Strain relief
During working, the strain relief
prevents any unintentional
disconnection of the electric cable and any
resulting damage to the mains connection
on the machine.
For this reason, the electric cable must be
fed through the strain relief.
●
Form a loop in the power cable (1) and
guide it through the opening (2).
●
Then push the loop over the hook (3)
and pull it tight.
1
0.3 Switching on the lawn
mower
●
Press and hold down the ON button (1).
Pull motorstop lever (2) to handlebar
and hold.
●
The ON button (1) can be released
once motorstop lever (2) is pressed.
1
0.4 Switching off lawn mower
●
Release motorstop lever (1).
Motor and mowing blade come to
a stop after a short run-down time.
1
0.5 Emptying the grass catcher
box
●
Detach the grass catcher box. (
●
Open the grass catcher box at the
tab (1). Fold up the upper part of the
grass catcher box (2) and hold. Fold the
grass catcher box rearwards and empty
the clippings.
●
Close the grass catcher box.
●
Attach the grass catcher box. (
11
.
1
General
Annual service by the specialist dealer:
The lawn mower should be inspected once
annually by a specialist dealer. VIKING
recommends VIKING specialist dealers.
11
.2 Cleaning the machine
Maintenance interval:
After each use
●
Place the machine on horizontal and
level ground.
●
Detach the grass catcher box. (
●
To clean the underside of the machine,
tilt the lawn mower (1) onto its side.
●
Only clean the machine using water,
with a brush or with a cloth. Remove
accumulated clipping deposits using a
stick. If necessary, use a special
cleaner (e.g. STIHL special cleaner).
●
Never spray water or high pressure
cleaners onto switches, motor
components, seals or bearing points.
11
.3 Electric motor and wheels
The electric motor is maintenance-free.
The wheel bearings are maintenance-free.
11
.4 Upper handlebar
Maintenance interval:
Before each use
Check the upper handlebar for damage –
it is coated with an insulating layer. Should
this layer become damaged, do not
operate the lawn mower and replace the
upper handlebar.
Do not start the motor in high grass
or when the mower is set to the
lowest cutting height, as this makes
switching on difficult.
1
0
11
Risk of injury!
The motor must be stopped for
safety reasons before removing the
grass catcher box.
11
. Maintenance
Risk of injury!
Observe the safety instructions in
the section "For your safety" (
1
2
1
3
1
4
Та
ше
в
-
Га
лв
ин
г
ОО
Д
www.tashev-galving.com
Содержание ME 235
