2
Features Overview
Push Button Switch:
Push to
initiate call, push again to
disconnect. Solid 316 stainless steel
internally sealed per IP67.
Speaker Screen:
Speaker screen
with 0.018" wide slots to prevent
punctures from paperclips, etc.
Faceplate Material:
14 gauge
316 stainless steel. The SS model
has a #4 brushed finish, the BN
models have a powder painted finish.
Speaker:
Mylar speaker with
rubber gasket to maintain water-tight
seal and eliminate water
deterioration.
Blue Call LED:
Lights steady to
help locate the button in low light,
flashes during dialing, then lights
steady when answered.
Microphone:
Omni-directional
microphone with protective
water-resistant cloth.
Front View of the
K-1775-3 Entry Phone
Condensation Drain Hole
Mounting Screws:
(4) 6-32 X
3/4” Marine grade 316 stainless
steel, flat head, T-10 Torx security
screws and drive bit (included).
Laser Etched Graphics:
For long lasting easy to
read graphics (Copper Metallic on model K-1775-BN-3).
Proximity Card Reader:
26-bit
Wiegand, 125KHz, red LED turns off
and transducer will beep during card
read. Fully potted EWP. Read range
1.25" to 2.0". Impact resistant
polycarbonate lens with water-tight
gasket.
1
2
ABC
5
JKL
8
TUV
0
OPER
4
GHI
7
PRS
#
3
DEF
6
MNO
9
WXY
VIKING
©
Color Video Camera:
Wide
operating temperature range of
-40°F to 140°F, NTSC composite
video output with 420 lines of
resolution, 80° wide viewing angle
lens, tilt and swivel adjustments for
aiming towards visitors.
Protective Camera Window:
Impact resistant polycarbonate lens
with scratch resistant coating and
water-tight gasket.
CAMERA SPECIFICATIONS
Power:
6-22V DC 150mA (12V DC UL Listed adapter included)
Image Sensor:
1/4” color CMOS
Video Output:
1 VP-P composite, NTSC, 75 ohms
Resolution:
420 lines (640 x 480 @ 30fps / 307,200 pixels)
Sensitivity:
0.025 LUX (50 IRE) F 1.2 3200K
Lens:
2.1mm, conical pinhole
FOV
(
Field of View)
: 80° Horizontal, 60° Vertical, 100° Diagonal
Tilt/Swivel Adjustment:
Ve/- 20°, hori/- 30° (see
Diagram A
right)
IR Compatibility:
This camera is equipped with an OLP (Optical
Low Pass) filter to maintain correct video color in outside
applications. The standard camera is
NOT
compatible with IR
illuminators. If IR illumination is required, you will need to replace
the exisiting camera with a Viking model
VCAM-1IR
, see
DOD# 190
.
Maximum Wire Run Length:
1000 ft with *RG59/RG6 for video and
CAT5 for power (1 pair) and entry phone audio (1 pair). 150 ft with
CAT5E for video, power and entry phone audio (longer video runs
are possible by using video balun transceivers, see
Installation
section
F
, page
6
).
Specifications
PROXIMITY CARD SPECIFICATIONS
Power:
5 to 14V DC @ 60mA maximum
Maximum Cable Length:
500 ft 24 Awg stranded shielded (Belden
9537)
Frequency:
125KHz
Format:
26 bit Wiegand
Read Range:
1.25” to 2.0”
Technologies Supported:
Viking
PRX-C
,
PRX-C-ISO
,
PRX-FOB
,
certain legacy HID® proximity protocols** and certain AWID 125Khz
proximity protocols***
Transducer:
Beeps during card read
LED:
Red, turns off during card read
Humidity:
Up to 100% (fully potted EWP)
Operating Temperature:
-34° C to 65° C (-30° F to 150° F)
* Note:
RG59 or RG6 with solid center conductor and 95% bare
copper braid shield.
** HID and the HID logo are registered trademarks of HID Global
Corporation, an ASSA ABLOY company. All other trademarks are
the property of their respective owners.
*** AWID is a trademark of Applied Wireless Identification Group.
ENTRY PHONE SPECIFICATIONS
Power:
Telephone line powered 20V DC/20mA minimum
Dimensions:
Overall: 140mm x 165mm x 66mm (5.5” x 6.5” x 2.6”),
Rough-in box: 114mm x 140mm x 64mm (4.5” x 5.5” x 2.5”)
Shipping Weight:
1.6 kg (3.5 lbs)
Environmental:
-29°C to 54°C (-20°F to 130°F)
Humidity - K-1775-3:
5% to 95% non-condensing
Humidity - K-1775-3-EWP:
Up to 100% condensing
Speaker Volume:
Approximately 70 db maximum @1m
Connections:
Gel-filled tip and ring connectors
CPC Disconnect Time:
500ms minimum
REN #:
0.5 A
80° Lens FOV
Rotate
Left 30°
Rotate
Right 30°
Camera Lens
Diagram A
Camera Horizontal Field of View:
