PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
S E C U R I T Y & C O M M U N I C A T I O N S O L U T I O N S
VIKING
Features
The
K-1775-3 Series
entry phones provide a tough and
attractive handsfree phone for commercial, apartment, and
residential door entry or applications requiring a vandal
resistant speaker phone with built-in 125 KHz Proximity Card
Reader and analog Color Video Camera. The card reader
outputs industry standard 26-bit Wiegand data, allowing it to
be used with a
Viking ES-1
or
C-4000
door controller or any
controller compatible with 26-bit Wiegand format. The
K-1775-3 Series
entry phones are available in two attractive
finishes: “brushed stainless steel” and “oil rubbed bronze”.
When the “Call” button is pressed, the
K-1775-3
returns dial
tone. The keypad may then be used to dial any number. If
no Touch Tone is entered within 8 seconds, CPC is detected,
a busy signal is detected, or the programmable maximum call
time has elapsed, the
K-1775-3
will automatically disconnect.
Alternatively, the
K-1775-3
may be disconnected by pressing
the “Call” button again. The
K-1775-3
provides CCTV video
of the entry area and comes complete with a standard, flush
mount, rough-in box. In addition, an optional
VE-6x7
weather
resistant, surface mount box is available (see
DOD 424
).
• Apartment entry phone when used with the
K-1900-3
Apartment
Entry Dialer or
C-4000
Apartment/Office Entry Controller or
C-3000
Apartment Entry Controller
• Use with a
Viking C-500
to control 1 or 2 (expandable to 8)
K-1775
’s and door/gate control on a single phone line (
DOD 177
)
• Use with a
Viking C-2000B
to control 1 to 4
K-177 5’
s and
door/gate control on a single phone line (
DOD 156
)
• Courtesy and customer assistance phone
• Automated teller (ATM) phone
• Use with a
Viking ES-1
for proximity card reader door control
• Provide unique front and back door chimes and paging when use
with a
Viking SLP-1
or
SLP-4
and
C-2000B
• Kiosk phone with (100 number speed dialing) when used with the
K-1900-9
Multi-Number Dialer (
DOD 321
)
• Use with Viking’s Proximity Cards:
PRX-C
,
PRX-C-ISO
,
PRX-FOB
(DOD 198)
Dimensions:
Overall: 5.5” x 6.5” x 2.6” (140mm x 165mm x 66mm),
Rough-in box:
4.5” x 5.5” x 2.5” (114mm x 140mm x 64mm)
Shipping Weight:
3.5 lbs (1.6 kg)
Environmental:
-30°F to 150°F (-34°C to 65°C)
Humidity - K-1775-3:
5% to 95% non-condensing
Humidity - K-1775-3-EWP:
Up to 100% condensing
(see page 2 for complete specifications)
Applications
Specifications
• Built-in 125KHz 26-bit Wiegand proximity card reader with LED and
beep card read confirmation and EWP board protection
• Built-in high resolution analog NTSC color video camera with wide
viewing angle, tilt/swivel adjustments, and operating temperature
of -40°F to 140°F
• Audio and video transmission on one CAT5E cable (see page 6)
• Compatible with the following Viking Proximity Cards and Fobs:
PRX-C
,
PRX-C-ISO
and
PRX-FOB (DOD 198)
•
Vandal Resistant Features:
14 gauge louvered 316 stainless
steel faceplate with permanent laser etched graphics, stainless
steel “Call” button, heavy duty metal keypad and T-10 Torx
security screws, scratch resistant powder coating (
K-1775-3-BN)
•
Weather Resistant Features:
Marine grade 316 stainless steel
faceplate, screws and and push button switch. Switch internally
sealed per IP67. Mylar speaker. Self-draining mic mount.
Faceplate, mic and speaker gaskets. Weather Resisant powder
paint (
K-1775-3-BN)
•
K-1775-3-EWP
is designed to meet IP66 Ingress Protection
Rating (see
DOD 859
for more information)
• Available in 2 standard faceplate finishes: 316 brushed stainless
steel or oil rubbed bronze powder paint
• Blue “in use” LED
• Telephone line powered
• Volume adjustments for microphone and speaker
• Advanced call progress detection: disconnects on busy signal,
return to dial tone, CPC, reorder tone, maximum call time out and
40 second silence time out
• Selectable auto-answer feature for monitoring
• Zinc plated steel rough-in box with (2) 3/4” conduit knockouts
The
K-1775-3-EWP
shares all of the features of the
K-1775-3
in addition to Enhanced Weather Protection (EWP) for outdoor
installations where the unit is exposed to precipitation or
condensation. EWP products feature foam rubber gaskets
and boots, sealed connections, gel-filled butt connectors, as
well as urethane or thermal plastic potted circuit boards with
internally sealed, field-adjustable trim pots and DIP switches
for easy on-site programming. For more info, see
DOD 859
.
K-1775-3
“Brushed Stainless Steel”
(similar to brushed nickel)
K-1775-3-BN
“Oil Rubbed Bronze”
(satin dark brown powder paint
with fine copper metallic)
Vandal Resistant Entry Phones with Built-In Keypad,
Proximity Card Reader, and Color Video Camera
K-1775-3 Series
Video Entry Phones with
Keypads and Card Readers
February 15, 2018
