D. Wiring the K-1205 Camera
VIKING
Model: xxxxxxxxx
P/N: xxxxxxxxx
S/N: XXXXXX
Viking Electronics, Inc. (715)386-8861
1531 Industrial St., Hudson, WI 54016
DEV:
RoHS
Back View of
the K-1205
** Camera Pwr (+)
Orange
** Camera GND (-)
W/O
Yellow
(Video)
3-Wire Gel-Filled Butt
Connectors included
(3M Scotchlok UR2)
CAT5 Cable
To unused input on TV, VHF
modulator, whole house video
distribution equipment, IP video
encoder (Axis M7001), etc.
W/O
Orange
*** RG59 or RG6
Shielded Video Cable,
up to 1000 ft
Center conductor
stripped back 5/8"
Twisted foil and braided shield
** Up to 1000 ft
"F"
Connector
"F" to Phono Plug
Adapter
(Radio
Shack part #278-252)
- Black
(GND)
+ Red
(12VDC)
Black
OR
Yellow/Red
**** Female "F" to Wire or "BNC" to Wire
Converter Cable
(not included)
**** For ease of installation, a Viking
Female "F" to Wire Converter Cable can
be used (Part # 261217) or "BNC" to wire
converter cable (Part # U213510) can be
used. Go to www.vikingelectronics.com
and click on "Spare Parts" to order.
120V AC
Camera
GND (-)
Camera
Power (+)
12V DC
Adapter
(included)
(-)
!
(+)
(4) Crimp-on Splice
Connectors (not included)
-
+
IMPORTANT:
Electronic devices are susceptible to lightning and power station electrical surges from both the AC
outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.
2. Using CAT5E or CAT6 for Video and Camera Power (see Caution below)
VIKING
Model: xxxxxxxxx
P/N: xxxxxxxxx
S/N: XXXXXX
Viking Electronics, Inc. (715)386-8861
1531 Industrial St., Hudson, WI 54016
DEV:
RoHS
Yellow
(Video)
- Black
(GND)
+ Red
(12VDC)
** Camera Pwr (+)
Orange
** Camera GND (-)
W/O
Video GND (-)
Green
Video Out (+)
W/G
* Up to 150 ft
3-Wire Gel-Filled Butt
Connectors included
(3M Scotchlok UR2)
CAT5E or
CAT6 Cable
(see Caution below)
Phono (RCA) Plug,
F Connector, Etc.
(+)
(-)
To unused input on TV, VHF
modulator, whole house video
distribution equipment, IP video
encoder (Axis M7001), etc.
Video
Out (+)
W/G Green
W/O
Orange
Back View of
the K-1205
120V AC
Camera
GND (-)
Camera
Power (+)
12V DC
Adapter
(included)
(-)
!
(+)
(4) Crimp-on Splice
Connectors (not included)
-
+
Video
GND (-)
* Note:
Up to 150 ft video cable run length can be achieved using CAT5E or CAT6 cable. Longer cable runs can be
used if a passive or active video Balun transceiver is used on each end of the cable. Generally, passive transceivers
can achieve up to 750 ft cable runs where active transceivers can achieve up to 3000 ft runs depending on cable
type, etc. The type of video balun transceiver required is specific to your cable run length. For more information on
video balun transceivers go to: www.northernvideo.com.
** Note:
The maximum camera power supply wire run length is 1000 ft of 24 gauge wire (CAT 5/6), longer runs are
possible by doubling pairs, increasing the wire gauge or using up to a 22V DC 200mA power adapter.
*** Note:
RG59 or RG6 with solid center conductor and 95% bare copper braid shield.
Caution:
When routing CAT5E or CAT6 cable, maintain a minimum distance of 3 ft from any parallel high voltage
wire (110 VAC) and a minimum of 2 ft from crossing any high voltage wire. For installations where RF noise is
expected (commercial applications) or wire runs are near high voltage (110 VAC) wires, a shielded video cable
such as RG6 is recommended.
1. Using RG59 for Video and CAT5 for Camera Power (Recommended)
4
