2
Camera Specifications
Power:
6-22V DC 150mA (12V DC UL Listed adapter
included)
Image Sensor:
1/4” color CMOS
Video Output:
1 VP-P composite, NTSC, 75 ohms
Resolution:
420 lines (640 x 480 @ 30fps / 307,200
pixels)
Sensitivity:
0.025 LUX (50 IRE) F 1.2 3200K
Lens:
2.1mm, conical pinhole
FOV
(
Field of View):
80° Horizontal, 60° Vertical, 100°
Diagonal
Tilt/Swivel Adjustment:
Ve/- 20°, hori/-
30° (see
Diagram A
)
IR Compatibility:
This camera is equipped with an OLP
(Optical Low Pass) filter to maintain correct video color
in outside applications. The standard camera is
NOT
compatible with IR illuminators. If IR illumination is
required, you will need to replace the exisiting camera
with a Viking model
VCAM-1IR
. For more information,
see
DOD# 190
.
Maximum Wire Run Length:
1000 ft with *RG59/RG6
for video and CAT5 for power (1 pair) and entry phone
audio (1 pair). 150 ft with CAT5E for video, power and
entry phone audio (longer video runs are possible by
using video balun transceivers, see
Installation
section
D, 2. Using CAT5E or CAT6 for Video and Camera
Power
on page
4
).
* Note:
RG59 or RG6 with solid center conductor and
95% bare copper braid shield.
Entry Phone Specifications
Dimensions:
127mm x 254mm x 63.5mm (5" x 10" x
2.5")
Operating Temp:
-35°C to 66°C (-30°F to 150°F)
Shipping weight:
2.5 kg (5.5 lbs.)
Connections:
(13) gel-filled butt connectors (3M
Scotchlok UR2)
80° Lens FOV
Rotate
Left 30°
Rotate
Right 30°
Camera Lens
Diagram A
Camera Horizontal Field of View:
Entry Phone / Camera Specifications
Power:
12 to 24V AC or DC, 12V DC adapter provided.
Note:
To assure operation during a power outage, a UPS
should be used.
Operating Temperature:
-34° C to 65°
C (-30° F to 150° F)
Humidity:
Standard model: 5% to 95% non-condensing,
EWP model: Up to 100%
Relay Contact Rating:
Door Strike: 5A @
30VDC/250VAC Maximum, Camera: 0.5A @ 125 VAC,
1.0A @ 30VDC
Connections:
(13) gel-filled butt connectors (3M
Scotchlok UR2)
Recommended Surface Mount Box:
Viking model
VE-
5x10
(
DOD# 424
)
Specifications
