Color
Function
Black
Power In
Black
Power In
Green
Phone Line In
Red
Phone Line In
Brown
Door Strike Relay common
Orange
Door Strike Relay NC
Yellow
Door Strike Relay NO
Blue
Camera Relay common
Violet
Camera Relay NC
White
Camera Relay NO
Installation
IMPORTANT:
Electronic devices are susceptible to lightning and power station electrical surges from both the AC
outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.
A. Mounting
The
K-1205
is designed to be installed in a sheltered location, and is not meant to be used outdoors. For outdoor
applications use the
K-1205-EWP
. The
K-1205
can either be installed as a flush mount unit using the included
rough in box, or as a surface mount unit using an optional
VE-5x10
. The rough in box uses the inner set of four
holes on the face plate while the
VE-5x10
uses the outside set of holes. A set of dummy screws and nuts are
provided to fill the unused mounting holes.
VIKING
©
1
2
3
4
5
6
7
8
9
0
#
*
#
*
0
9
8
7
6
5
4
3
2
1
Optional VE-5x10 Surface Mount
Box (not included), see DOD# 424
10.0"
9.5"
4.50"
2.596"
5.00"
8.65"
0.425"
0.952"
Front View
of the K-1205
9.12"
2.5"
4.5"
Zinc-Plated Steel
Rough-In Box
(included)
Side View
of the K-1205
(8) #6-32 x 3/4" Stainless
Steel, T-10 Torx Security
Screws with drive bit
(included)
14 Gauge Marine
Grade 316 Stainless
Steel Faceplate
10.14"
3.69"
5.22"
- OR -
B. Changing the Directory
To install a directory, remove the four screws that
mount the directory lens to the front of the
K-1205
using the included Allen wrench. Insert a paper
directory behind the lens and secure the two back onto
the front panel being careful to align the names with the
front panel graphics.
Note:
To print directory forms for the
K-1205
, go to
www.vikingelectronics.com and enter “930” in the DOD
field at the top of the page for a direct link to the PDF.
Paper Directory
Directory
Lens
C. Wiring
The
K-1205
can be powered from any source
supplying 12 to 24 volts, AC or DC. A 12 volt DC
adapter is supplied with the product. When using the
included adapter, the plug on the adapter cord will have
to be removed. The power connections to the
K-1205
(black wires) are not polarity sensitive.
There are also 8 more wires connected to the
K-1205
controller board. Two wires are for the incoming phone
line, three are from the high current door strike relay
and the last three are from the camera relay. Gel filled
butt connectors are provided for easier connection to
building wiring. The table at the right describes each
wire’s function.
3
