0
1. Press Help.
2. Press number
3
.
3. Enter the start time.
430
4. Press Clock.
5. Enter cooking program. Press Power Level 6 times for 50% power.
Then enter cooking time by touching number pad
2000
.
6. Press Start.
note:
1. Auto Start can be used for manual cooking if clock is set.
2. If the oven door is opened after programming Auto Start, it is necessary to
press Start for Auto Start time to appear in the readout so that the oven will
automatically begin programmed cooking at the chosen Auto Start time.
3. Be sure to choose foods that can be left in the oven safely until the Auto
Start time. Acorn or butternut squash are often a good choice.
4. If you wish to know the time of day, simply press Clock. As long as your
finger is touching
Clock, the time of day will be displayed.
. refreSH cycle
The oven has a special catalyst which assists with smoke and odor
removal.
use the refresh cycle to:
• Condition the heater before using the oven the first time.
• Remove any objectionable odor.
• Keep the catalyst in optimum condition.
Follow the procedure below. The oven temperature will be maintained at
450˚F when the refresh cycle operates.
1. Press Help.
2. Press number
4
.
3. Press Start.
note:
1. Remove the turntable from the oven before the Refresh Cycle. No food
should be in the oven.
2. The Refresh Cycle is 30 minutes.
3. During the Refresh Cycle some smoke and odor may occur. Open a window
or use the ventilation fan in the room.
caution:
The oven door, outer cabinet and oven cavity may be hot.
