1.
GET TO KNOW YOUR MACHINE
5
2
5
7
8
9
ACCESSORIES
1. Screwdriver
2. Felt
pad
3. Seam
Ripper/brush
4. Multipurpose tool/Button reed
5. Bobbins
6. Spool cap large
(attached on the machine upon delivery).
7. Spool cap small
(attached on the machine upon delivery)
8. Edge/Quilting
guide
9. Light bulb remover
10. Carrying case
11. Accessory box
(attached on the machine upon delivery).
12. Needle pack (not in picture)
13. Foot control and power cord
(not in picture)
14. Extension Table (not in picture)
(only EMERALD™ 203)
11
3
10
1
4
6
PRESSER FEET
7
Utility Foot A
Attached on the machine upon delivery. This foot is used mainly for straight stitching
and zigzag stitching with a stitch length longer than 1.0.
7
Presser Foot B
When sewing short zigzag stitches and satin stitches with less than 1.0 mm stitch
length, other utility stitches or decorative stitches, use this foot. The tunnel on the
underside of the foot is designed to feed smoothly over the stitches.
Buttonhole Slider Foot C
This foot has a space in the back to set the size of the buttonhole. The machine will
sew a buttonhole to fi t that button size.
