6
INSTALLING THE ISLAND HOOD DUCT COVER
1. Cut hole in ceiling for 10” diameter duct.
2. Attach duct cover mounting bracket to the top of the duct cover with the nuts and screws provided.
3. Using the screws provided, mount the bracket to the ceiling. Make sure the area is able to support at least 200 lbs.
(Center duct cover with 10” diameter hole.)
4. Run duct work down to bottom edge of duct cover and secure in place. Make sure the duct does not stick down
past the cover.
5. Attach duct cover to the top of the canopy with screws provided. Additional support can be added by running
threaded rod from the ceiling to the top of the canopy at all four corners. Holes must be drilled.
6. Install blower. (See ventilation kit installation.)
Model “A”
“B”
“C”
VCCI3608
12” (30.5 cm) 6” (15.2 cm)
12” (30.5 cm)
VCCI3609
12” (30.5 cm) 6” (15.2 cm)
24” (61.0 cm)
VCCI3610
12” (30.5 cm)
6” (15.2 cm)
36” (91.4 cm)
VCCI4208
12” (30.5 cm) 6” (15.2 cm)
12” (30.5 cm)
VCCI4209
12” (30.5 cm) 6” (15.2 cm)
24” (61.0 cm)
VCCI4210
12” (30.5 cm) 6” (15.2 cm)
36” (91.4 cm)
VCCI5408
18” (45.7 cm) 9” (22.7 cm)
12” (30.5 cm)
VCCI5409
18” (45.7 cm) 9” (22.7 cm)
24” (61.0 cm)
VCCI5410
18” (45.7 cm) 9” (22.7 cm)
36” (91.4 cm)
VCCI6608
24” (61.0 cm) 12” (30.5 cm) 12” (30.5 cm)
VCCI6609
24” (61.0 cm) 12” (30.5 cm) 24” (61.0 cm)
VCCI6610
24” (61.0 cm) 12” (30.5 cm) 36” (91.4 cm)
