12
P
ro
d
u
c
t
C
o
n
tr
o
ls
Lighting Burners
All burners are ignited by electric ignition.
There are no open-flame, “standing” pilots.
Surface Burners-Automatic Reignition
To light the surface burners, push and turn the
appropriate control knob counterclockwise to
any position. This control is both a gas valve
and an electric switch. Burners will ignite at any “ON” position with the
automatic re-ignition system. If the flame goes out for any reason, the
burners will automatically reignite if the gas is still flowing. When gas is
permitted to flow to the burners, the electric igniters start sparking. On all
surface igniters you should hear a “clicking” sound. If you do not, turn off
the control and check that the unit is plugged in and that the fuse or circuit
breaker is not blown or tripped.
Rear and Front Burners
Push in and turn the control knob counter-clockwise to the desired setting.
The control knobs can be turned to any desired setting as the knobs do
not have fixed positions between “hi” and “simmer”.
Within a few moments, enough gas will have traveled to the burner to
light. When the burner lights, turn the burner control to any position to
adjust the flame size. Setting the proper flame height for the desired
cooking process and selecting the correct cooking vessel will result in
superior cooking performance, while also saving time and energy.
Note:
The igniters may click a number of times before the burner ignites.
This is normal. All igniters will spark regardless of which burner is being
operated.
Surface Operation
All manuals and user guides at all-guides.com
