Clearance Dimensions
General Information
Site Preparation
Note:
It is recommended that a thorough site
inspection be conducted prior to unpacking and
moving this appliance.
• Chamfer all exposed edges of decorative
laminate to prevent damage from chipping.
• Radius corners of cutout and file to Insure
smooth edges and prevent corner cracking.
Recommend 1/4“or 3/8“ diameter drill In each
corner.
• Rough edges, inside corners which have not
been rounded and forced fits can contribute to
cracking of the countertop laminate.
• Confirm available access to adequate power–
see electrical requirements
.
• Be sure that the countertop for this appliance
is level and cut according to the cutout
requirements and dimensions–
see cutout
requirements and dimensions
.
• All wall coverings, countertop and cabinets
around the cooktop should withstand heat up
to 200°F (90° C).
• Keep appliance free from combustible materials,
gasoline, and other flammable vapors.
Installation Procedure
Remove packaging materials and literature package
from the cooktop before beginning installation.
Remove Installation Instructions from literature pack
and read them carefully before you begin.
ELECTRICAL SHOCK
HAZARD
The models may be powered
at 240V or 208V.
WARNING
DO NOT
use an extension cord with this
appliance. Such use may result in fire,
electrical shock or other personal injury.
WARNING
14
Install junction
box so that it can
be reached
through the front
of cabinet.
*
THE CONDUIT IS 3 FEET LONG
The junction box must be located where it
will allow considerable slack in the
conduit for serviceability.
WARNING
Junction Box Location
*Note:
Minimum from bottom of countertop
and adjacent right-side cabinet to top of
junction box.
