manualshive.com logo in svg

Viking Designer DEDO530T, Руководство по обслуживанию

Поделиться
Скачать
Viking Designer DEDO530T Скачать руководство пользователя страница 2

Important Information  

 

        

                                                                                   

 

© 2008 Viking Preferred Service 

2

 

SAVE THESE INSTRUCTIONS 

REVIEW ALL SERVICE INFORMATION IN THE APPROPRIATE SERVICE MANUAL AND TECHNICAL SHEETS 

BEFORE BEGINNING REPAIRS. 

 

Pride and workmanship go into every product to provide our customers with quality appliances. It is possible, 
however, that during the lifetime of a product service maybe require. Products should be serviced only by a qualified 
authorized service technician who is familiar with the safety procedures required to perform the repair and is equipped 
with the proper tools, parts, testing instruments, and the appropriate service manual. 
 

Safety Information 

We have provided many important safety messages 
throughout this manual and on the product. Always 
read and obey all safety statements. To properly 
identify a safety statements look for the following 
safety alert symbol. 

 

This symbol alerts personnel to hazards that can 
many different types of altering messages. All safety 
messages will be preceded by a safety alert symbol 
and the word “DANGER”, “WARNING” or 
“CAUTION”. 

DANGER

 

Immediate hazards which WILL result in severe 

personal injury or death. 

WARNING

 

Hazards or unsafe practices which COULD result 

in severe personal injury or death. 

CAUTION

 

Hazards or unsafe practices which COULD result 

in minor personal injury, product or property 

damage. 

All safety messages will identify the hazard, tell you 
how to reduce the chance of injury, and inform you 
what can happen if the instructions are not followed. 

WARNING

To avoid risk of serious injury or death, repairs 

should not be attempted by unauthorized 

personnel. 

CAUTION

 

VIKING will not be responsible for any injury or 

property damage from improper service 

procedures. If performing service on your own 

product, you must assume responsibility for any 

personal injury or property damage which may 

result. 

To locate an authorized service agent, call: 
Viking Customer Service 
Phone No. 1-888-845-4641 
Address your written correspondence to: 
Viking Preferred Service 
1803 HWY 82 West 
Greenwood, MS  38930 
 

Содержание Designer DEDO530T










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды