![Viking Designer DEDO530SS Скачать руководство пользователя страница 34](http://html1.mh-extra.com/html/viking/designer-dedo530ss/designer-dedo530ss_service-notebook_1023511034.webp)
34
Oven Cycle/Clean Indicator
Lights Removal
The Oven Cycle/Clean Indicator Lights are
located on the control panel. The Oven Cycle
Indicator Light is used to indicate when an oven
element is on. The Clean Indicator Light is on
when the oven is in self-clean mode.
WARNING:
Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION:
Some areas of the oven
interior are sharp; wear protective gloves to
avoid injury.
Condition Requirements:
Partial Access to Control Components
1.
Hold the red lens and slide off the
indicator light. The indicator light will
only slide in one direction.
2.
Disconnect two connectors from the
indicator light.
3.
Reverse procedure for installation.
Oven Timer/Clock Removal
The Oven Timer/Clock is located on the control
panel. It is used to control the meat probe, bake
time, and automatic bake functions. The digital
and analog styles are replaced using the same
procedures.
Digital Timer
WARNING:
Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION:
Some areas of the oven
interior are sharp; wear protective gloves to
avoid injury.
Condition Requirements:
Partial Access to Control Components
1.
Pull to remove one knob and four buttons
from the digital timer.
2.
Remove two screws from each side of the
control panel assembly.
3.
Lower the control panel assembly forward
leaving the panel in the three tabs along
the bottom of the panel.
Содержание Designer DEDO530SS
Страница 18: ...18 Service Procedures Part Locator...
Страница 50: ...50 Oven Control Board Oven Control Board Connections...
Страница 68: ...68...