![Viking Designer DEDO530SS Скачать руководство пользователя страница 31](http://html1.mh-extra.com/html/viking/designer-dedo530ss/designer-dedo530ss_service-notebook_1023511031.webp)
31
Access to Control Components
The Control Components are located on top of the
oven. Access is required in order to perform many
troubleshooting procedures and remove some
control components. The single and double ovens
are similar. The upper oven controls are on the left
side and the lower oven controls are on the right.
Partial or full access may be required depending
on the component being tested or removed.
Partial Access
DANGER:
ONLY TRAINED AND
QUALIFIED TECHNICIANS SHOULD
TROUBLESHOOT THIS OVEN WITH
POWER CONNECTED. USE EXTREME
CARE TO AVOID ELECTRIC SHOCK
WHEN TESTING COMPONENTS.
WARNING:
Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION:
Some areas of the oven
interior are sharp; wear protective gloves to
avoid injury.
Condition Requirements:
Oven Partially Removed
1.
Remove eight screws and the top front
component access panel.
2.
Reverse procedure for installation.
Full Access
DANGER:
ONLY TRAINED AND
QUALIFIED TECHNICIANS SHOULD
TROUBLESHOOT THIS OVEN WITH
POWER CONNECTED. USE EXTREME
CARE TO AVOID ELECTRIC SHOCK
WHEN TESTING COMPONENTS.
WARNING:
Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION:
Some areas of the oven
interior are sharp; wear protective gloves to
avoid injury.
Condition Requirements:
Oven Fully Removed
1.
Remove six screws and the top rear
component access panel.
2.
Reverse procedure for installation.
Содержание Designer DEDO530SS
Страница 18: ...18 Service Procedures Part Locator...
Страница 50: ...50 Oven Control Board Oven Control Board Connections...
Страница 68: ...68...