Viking DDSF, Руководство по установке

Страница: 5 / 16

5
R Re ep pllaacciin ng g tth he e D Do oo orrss
To replace the doors, follow the steps in Door and Hinge Removal in reverse order. IIM MP PO OR RT TA AN NT T:: If water line tube
end is damaged, cut off 5/8” before reconnecting.
When reinstalling bottom hinges, install the screws in the sequence shown below for both hinges
IIN NS ST TA ALLLLA AT TIIO ON N
3. Close doors.
4. Remove top hinge covers by removing Phillips screws.
5. Unscrew 5/16” hex head screws from top hinges. (See figure 2.)
6. F Fo orr iicce e aan nd d w waatte err d diissp pe en nssiin ng g m mo od de ellss o on nllyy::
Detach main wire connector harness. Do not remove
screw connecting green ground wire. (See figure 3).
To detach main wire harness, use a flat blade tool or fingernail to press junction
point between two connectors to release. (See figure 4).
7. Remove top hinges along with doors. (See figure 5).
Figure 2
Figure 4
Figure 5
Figure 3
1 1
2 2
1 1
2 2
3 3
4 4
3 3
4 4