39
38
3
4
2
Place duct cover top inside duct cover base and lower until
desired height is found. Mark height. Use the retaining nuts
and bolts to fasten in place from inside and remove tape.
Slide duct cover in place and fasten from inside canopy
using the sheet metal screws provided.
1
2
Slide rails into openings in duct cover.
3
4
Slide rails out and position in elbows.
Fasten duct cover to canopy with screws provided.
Lower duct cover into position on canopy.
Duct Cover Required
(DSWB Box Wall Hoods Only)
2
1
3
7
1
2
1
2
3
8
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Slide spacer front over front lip. Push spacer rear up,
then slide back over rear lip.
NOTE:
Number of spacers
and baffles may vary by model.
Duct Cover Option
(DTWS Slim Traditional Wall Hoods)
Tape to avoid scratching.
Measure distance from ceiling to canopy.
1
2
3
6
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
