49
7
8
Adjust and reposition bezel
as necessary. Tighten all screws securely.
Replace spill tray in lower part of bezel.
9
Align cube switch with sliding lever and firmly push
until sliding lever is flush with bezel.
48
Install custom wood panels per product’s installation
instructions.
Locate opening in door and position bezel.
Note:
Graphics on bezel will be on top end, tilt slightly
forward to allow water tube clearance.
Push firmly into cavity until lower screw holes align with
mounting holes on cavity.
Install two screws in lower part of bezel
but do not tighten all the way.
Position upper mounting support over holes
underneath top section of bezel.
Install two screws but do not tighten all the way.
1
2
3
4
5
6
Ice and Water Dispenser Bezel Installation (if required)