46” min.
(116.8 cm)
13” max.
(
33.0 cm)
9” m
in.
(22.8
cm)
18” min.
(45.7 cm)
3/8”
(0.95 cm)
36”
(91.4 cm)
A
Range
Width
“A”
Dimension
36”
36” (91.4 cm)
48”
48” (121.9 cm)
Clearance Dimensions
(Proximity to Cabinets)
9
• This range may be installed directly
adjacent to existing 36” (91.4 cm) high
base cabinets.
IMPORTANT:
The side trim MUST be
3/8” (.95 cm) above the adjacent base
cabinet countertop. This can be
accomplished by raising the unit using
the adjustment spindles on the legs.
• The range CANNOT be installed
directly adjacent to sidewalls, tall
cabinets, tall appliances, or other
side vertical surfaces above
36” (91.4 cm) high. There must be
a minimum of 9” (22.8 cm) side
clearance from the range to such
combustible surfaces above the
36” (91.4 cm) counter height.
• Within the 9” (22.8 cm) side
clearance to combustible vertical
surfaces above 36” (91.4 cm), the
maximum wall cabinet depth
must be 13” (33.0 cm) and wall
cabinets within this 9” (22.9 cm)
side clearance must be
18” (45.7 cm) above the
36” (91.4 cm) high countertop.
• Wall cabinets above the range must be a
minimum of 46” (116.8 cm) above the
range cooking surface for the full width
of the range. This minimum height
requirement does not apply if a range
hood is installed over the cooking surface.
Note:
Minimum clearance for back wall is 3/8”
(0.9 cm) with backguard or high-shelf.
Note:
If a range hood is installed, wall cabinets above
the range have a different minimum clearance height.
Note:
Clearances from non-combustible materials are
not part of the ANSI Z21.1 scope and not certified by
CSA. Clearances to non-combustible materials must be
approved by the authority having jurisdiction.
CAUTION
BURN HAZARD
To avoid risk of personal injury;
the use of cabinets for storage
above the appliance may result
in a potential burn hazard. Combustible
items may ignite, metallic items may
become hot and cause burns. If a cabinet
storage is to be provided the risk can be
reduced by installing a rangehood that
projects horizontally a minimum
5
"
(12.7 cm) beyond the bottom of cabinets.
Specifications
8
Minimum clearances from adjacent combustible construction:
Below cooking surface (36” [91.4 cm] and below)
• Sides - 0”
• Top grate support - 36” (91.4 cm)
Above cooking surface (above 36” [91.4 cm])
• Sides - 9” (22.8 cm)
• Within 9” (22.8 cm) side clearance, wall cabinets no deeper than 13” (33.0 cm) must be minimum 18” (45.7 cm)
above cooking surface
• Wall cabinets directly above product must be a minimum of 46” (116.8 cm) above cooking surface
• Rear - 3/8” (0.9 cm) with 10” backguard or high shelf; 0” with island trim and non-combustible rear wall;
• 6” (15.2 cm) with island trim and combustible rear wall
Gas 36” and 48” W. Ranges
Description
BVGRC836-6B-W/BVGRC836-6B-S
BVGRC848-6G-W/BVGRC848-6G-S
Overall width
35-7/8” (9
1.1 cm)
47-7/8” (121.6 cm)
Overall height
To top of side trim – 35-7/8” (91.1 cm) min. 37” (94 cm) max.
Legs adjust – 1-1/8” (2.9 cm)
Overall depth from
rear*
To end of side panel – 25-11/16” (65.3 cm)
To front of door – 28” (71.1 cm)
To end of door handle – 31-1/2” (80.1 cm)
*Add 3/8” (1 cm) to overall depth for models installed against a combustible wall.
Additions to Base
Height
To top of island trim – add 1-3/16” (3 cm)
To top of backguard – add 10” (25.4 cm)
To top of high shelf – add 23-1/2” (59.7 cm)
Gas requirements
Shipped Natural or LP/Propane, accepts standard residential 1/2” (1.3 cm) ID gas
service line. Unit is not field convertible.
Gas manifold pressure
Natural 5.0” W.C.P./ Liquid Propane L/P 10.0” W.C.P.
Electrical
requirements
120VAC/60 Hz; 4 ft. (121.9 cm), 3-wire cord with grounded
3-prong plug attached to unit
Maximum amp usage
1.5 amps
2.0 amps
Surface burner rating
Natural gas/LP
Front: 23,000 BTU (6.7 kW) / 21,500 BTU (6.3 kW)
Rear: 15,000 BTU (4.4 kW) / 13,500 BTU (4.0 kW)
Griddle burner rating
Natural gas/LP
N/A
15,000 BTU (4.4 kW)/13,500 BTU (4.0 kW)
Oven interior width
30” (76.2 cm)
Oven interior height
15-1/2” (39.4 cm)
Oven interior depth
Overall – 21-1/2” (54.6 cm) AHAM 20-1/2” (52.1 cm)
Oven volume
Overall
AHAM
5.8 cu. ft.
5.5 cu. ft.
Approximate
shipping weight
525 lbs. (236.6 kg)
641 lbs. (288.5 kg)
Note:
Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and not certified by
CSA. Clearances to non-combustible materials must be approved by the authority having jurisdiction.
