Viking Built-in French Door Bottom-Freezer Refrigerator, Руководство по установке

Страница: 11 / 12

21
If service is required, call your dealer or authorized service agency. The name of the authorized
service agency can be obtained from the dealer or distributor in your area.
Have the following information readily available.
• Model number
• Serial number
• Date purchased
• Name of dealer from whom purchased
Clearly describe the problem that you are having. If you are unable to obtain the name of an
authorized service agency, or if you continue to have service problems, contact Viking Range, LLC
at 1-888-(845-4641), or write to:
V VIIK KIIN NG G R RA AN NG GE E,, L LL LC C
P PR RE EF FE ER RR RE ED D S SE ER RV VIIC CE E
1 11 11 1 F Frro on ntt S Sttrre ee ett
G Grre ee en nw wo oo od d,, M Miissssiissssiip pp pii 3 38 89 93 30 0 U US SA A
Record the following information indicated below. You will need it if service is ever required.
The serial number and model number for your refrigerator is located on the identification plate
mounted on the upper wall behind the lighting.
Model No. _________________________________________________________________________________________________________
Serial No. _________________________________________________________________________________________________________
Date of Purchase _________________________________________________________________________________________________
Date Installed _____________________________________________________________________________________________________
Dealer’s Name ____________________________________________________________________________________________________
Address ______________________________________________________________________________
If service requires installation of parts, use only authorized parts to insure protection under the
warranty.
K Ke ee ep p tth hiiss m ma an nu ua all ffo orr ffu uttu urre e rre effe erre en ncce e..
20
Final Installation Service & Registration
1. Turn the water supply line valve to the
“Open” position.
2. Turn the refrigerator switch to the ON
position. See “Power On/Off Switch” in
the Use & Care Guide for instructions.
Wait a few minutes. Check the water line
connections for leaks.
3. Remove all boxes, parts packages and
packing materials from the interior of the
refrigerator. See the “Cleaning” section in
the Use & Care Guide for instructions.
Remove the film and cardboard from the
grille and doors or door frame, depending
on your model.
4. Install the shelves and bins in the
refrigerator and freezer compartments.
5. The controls are preset at the factory to
the midpoint setting. Make sure the
compressor is operating properly and that
all the lights are working.
6. If construction will continue after the
refrigerator has been installed, set the
controls to OFF.
To get the most efficient use from your new
built-in refrigerator, read the Use & Care
Guide. Keep Installation Instructions and Use
& Care Guide near the built-in refrigerator
for easy reference.
C Co om mp plle ette e IIn nsstta alllla attiio on n