5
Mounting
Step 1.
Attach the round mounting plate base to wall, ceiling, post, etc. with appropriate fasteners (not included) (
Diagram A
).
Step 2.
Loosely attach the two side collars to the paging horn using the Philips head bolt, two washers, locking washer, and wing
nut (
Diagram B
).
Step 3.
Slide this assembly onto the mounting plate base (
Diagram C
). Loosely secure with remaining carriage bolt, washer,
locking washer, and wing nut (
Diagram D
).
Step 4.
With both wing nuts loose, rotate and angle the horn into position, then tighten both wing nuts to secure.
Round
Mounting
Plate Base
Screws
(not included)
(4) 0.217”
diameter
1.99”
3.26”
1.99”
Mounting Plate
Dimensions
SIP / Multicast
Paging Horn
Status
VIKING
MODEL 300-IP
www.VikingElectronics.com
Side Collars
Phillips
head bolt
Washer
Washer
Lock
Washer
Wing
Nut
Round Mounting
Plate Base
SIP / Multicast
Paging Horn
Status
VIKING
MODEL 300-IP
www.VikingElectronics.com
Carriage
bolt
Washer
Lock
Washer
Wing
Nut
SIP / Multicast
Paging Horn
Status
VIKING
MODEL 300-IP
www.VikingElectronics.com
Diagram A
Diagram B
Diagram C
Diagram D
