4
Features Overview
Reset Wires:
Open the waterproof RJ45 connector and remove black wires. Short wires
during power up to reset security code or network parameters to factory
default, see page 9 section E.
MAC Address Label:
The MAC address is a
unique 12 digit number
used by routers to send
network traffic to the
correct IP address.
Back View
PoE LAN Port 10/100, PoE Class 3 (<13 Watts):
Connect to your LAN via RJ45 plug and CAT5 or greater twisted pair wire.
Red Call/Status LED:
Flashes when unit is not
registered, during manual
reset and during dialing, lights
steady when answered.
Front View
Waterproof RJ45 Connector:
Protects the connections from outside
elements. Open to expose Cat5 jack. Route
Cat5 or greater wire through cover. Terminate
wires per T568A or T568B, then tighten cover
to create a seal around the Cat5 wire.
