B. DC 12V output. Switch between AC and DC output by long pressing the "ON/OFF" bu�on. The DC
output is most commonly used to power car refrigerators, LED lights and more.
C. USB-C output (PD) : This port can be used to charge devices with PD fast charging support.
D. USB-A Output (2x): USB1: 5V/4.5A; 9V/2A; 12V/2A
USB2: 5V/2.4A
E. CAR JUMP starter: Use step clamps to start the car. Connect the red terminal to the posi�ve terminal
of the ba�ery and the black terminal to the nega�ve terminal of the ba�ery. Connect the EC5 terminal
(blue) to the Car jump starter input on the generator. Start the vehicle, then disconnect the terminals.
If the generator ba�ery capacity is less than 50%, the generator cannot be used to start the vehicle.
This output has no protec�on circuit, so do not use it for long term charging, otherwise there is a
risk of electric shock or destruc�on of the equipment by short circuit.
COMMENT:
1) Do not use the output func�on while charging this product. The generator cannot be charged and
discharged at the same �me.
2) The output port sets the priority inser�on principle, that is, the generator detects which port has been
used first, and then intelligently shi�s the output of the other ports.
3) Although, the peak power of AC output is 200W, it is recommended not to exceed even the limit of
rated power of 150W. By being careful, you protect yourself and your devices.
RECOMMENDATION
GUARANTEE
A. This product is equipped with a high quality original lithium-ion ba�ery, which has no memory
effect, but has a high capacity and is durable. However, we s�ll recommend that you use it in an
environment with a temperature range of 10°C ~ 30°C to achieve op�mal charging capacity.
B. When charging, we recommend that you do not get close to devices such as TVs, radios, etc. to
avoid interference.
C. If the device has not been used for a long �me, disconnect it from any sources of electricity and
store it.
D. Once the generator is fully discharged, we recommend that the generator be fully charged within 3
months. It is also recommended to fully charge the device at least once every six months.
E. Fully charge the generator before first use.
The VIKING UP200 portable power supply is covered by a legal warranty of 24 months from the date
of purchase. Complaints are handled by the retailer from whom you purchased the product. When
making a claim, please send this product suitably packaged to prevent further damage.
Opening and private repairs to this equipment are not permi�ed.
Damage caused by external influences is beyond the scope of a�er-sales service.
We are not responsible for loss during shipping of the equipment.
Human damage to this equipment within the post-service period will be charged at the cost of
detec�on, purchase of replacement parts and repair.
Please note that the following damages are out of service repairs:
1. If the device is visually damaged by being dropped, scratched, dented or otherwise damaged by
negligent use.
2. When the equipment is damaged by fire, water, corrosion, or animals.
3. When the equipment is damaged by excessive voltage loads.