6
OPERATING INSTRUCTIONS
S
Se
ettttiin
ng
g tth
he
e C
Co
on
nttrro
ollss
The total available temperature range of the unit is from 40 - 43
0
F (4.4
-
- 6.1
0
C) to 64 - 66
0
F (17.8 - 18.9
0
C). The middle range
on the control is approximately 53
0
F (11.7
0
C). The higher the number selected, the cooler the temperature within the unit. As
with any refrigeration product, there is a slight temperature variance at different locations within the cabinet. For example, the
coolest area will be in the rear of the lowest shelf. The area on the top shelf will be 3 - 7
0
F warmer. This is the warmest
location in the cabinet. The area in the front will be 1 - 5
0
F warmer than the area in the rear of the shelves.
To start your wine cellar, use a screwdriver to turn the control clockwise to the middle thermostat setting. Once the wine cellar
is loaded allow at least 48 hours for the unit to stabilize before making any adjustments to the initial setting.
T
Tiip
pss aan
nd
d S
Su
ug
gg
ge
essttiio
on
nss
•After making a temperature adjustment, allow 24 hours for your wine cellar to reach a new temperature setting.
•The motor will start and stop often. It must do this to maintain the temperature setting.
•Unplug the wine cellar before working on anything with the electrical system.
•Exercise caution when sweeping, vacuuming, or mopping near the front of the unit. Damage to the grill and/or the light
fixture switch can occur.
LIGHT BULB REPLACEMENT
NOTE
: Please contact your local Viking Range
Corporation parts distributor or dealer to order new
light assembly.
To replace the light, first disconnect the wine cellar’s
power cord. Next, remove both the green ground
wire screw located on the left of the light assembly
and the other screw located on the right of the light
assembly with a 5-16” hex head screwdriver. (See
drawing). Unplug the light unit and remove complete
light assembly.
To install the new light assembly, screw in the green
ground wire screw and the screw located on the right
with a 5/16” hex head screwdriver and plug the light
unit in.
Plug
Hex head
screw
Light
assembly
Green
ground wire
Hex head
screw
INTERIOR LIGHT
The interior light allows you to view your wine cellar contents. When the switch is in the “OFF” position, the light will come on
only when the door is opened. In the “ON” position, the light remains on continuously
WARNING
Failure to disconnect the power cord when
changing the light bulb may result in electric shock.
