Viking Range VCTSO5200SS, Инструкция по установке, использованию и уходу

Страница: 6 / 20

6
Getting Started
Information You Need To Know
properly installed and grounded. Should
you only have a 2-prong outlet, have a
qualified electrician install a correct wall
receptacle.
A 3-prong adapter may be purchased
and used temporarily if local codes allow.
Follow package directions.
EXTENSION CORD
A short power-supply cord is provided to
reduce the risks resulting from becoming
entangled in or tripping over a longer
cord. Longer extension cords may be
used if care is exercised.
If a long extension cord is used, its desig-
nated electrical rating must be at least as
great as the electrical rating of the appli-
ance. The extension cord should also be
positioned so that it does not hang over
a countertop or tabletop where it can be
pulled on by children or tripped over.
The extension cord should be a ground-
ing-type 3-wire cord.
BEFORE OPERATING
Before operating the appliance, read
and understand this operation manual
completely.
Before the appliance can be used, follow
these steps:
1. Place the drip tray correctly. See
page 9.
2. Plug in the appliance. A beep will
sound and the display will show
“Toast”.*
3. Fill the water tank with cold, filtered
tap water and install. Check that an
audible signal sounds and the blue
LED lights blinks.
4. Follow directions to clean the oven
before first use.
* Default mode is “Toast”. Once you use
the appliance, it will show the cooking
mode you set last.
CLEAN THE OVEN BEFORE
FIRST USE
You may detect smoke or a burning smell
when using the appliance for the first
time, this is normal and not a sign that
the appliance is out of order. To avoid
this problem, when first using the oven,
operate the appliance without food for
20 minutes.
PREPARATION
1. Ventilate the room.
2. Install the drip tray.
3. Fill the water tank with cold, filtered
tap water and install.
4. Make sure nothing is in the appliance.
TO CLEAN THE OVEN BEFORE
USE, FOLLOW THESE STEPS.
1. Turn the dial until Bake/Reheat
appears in the display.
2. Press SELECT.
3. Turn the dial to set the temperature
(485°F).
4. Press SELECT.
5. Turn the dial to set the heating time
(20 M).
6. Press START.
WARNING
The oven door, outer cabinet, oven cavity
and especially the heating elements will
become hot.