Viking Range VCTSO5200SS, Инструкция по установке, использованию и уходу

Страница: 5 / 20

5
Getting Started
ADDITIONAL IMPORTANT
SAFEGUARDS
1. Do not put cooking utensils or baking
dishes on the opened door.
2. Do not touch the plug with wet hands
when inserting or removing from the
outlet. Plug securely into the electric
wall socket and remove by gripping
the plug. Never pull on just the cord
when unplugging from the wall.
3. Put cold, filtered tap water in the tank.
Do not put hot water or any other
liquids, in the water tank. See page 9.
4. Do not place sealed or airtight
containers in the appliance.
5. Do not operate the appliance if
the water tank is cracked and/or
leaking water. Contact a VIKING
AUTHORIZED SERVICER.
6. Do not try to adjust or repair the
appliance yourself.
7. Do not place or use the appliance
anywhere that water may splash
onto it.
8. Do not insert any objects in the steam
outlets or ventilation openings.
9. If the oven light fails, consult a VIKING
AUTHORIZED SERVICER.
INSTALLATION
INSTRUCTIONS
UNPACK & EXAMINE THE
APPLIANCE
Carefully unpack the appliance, and
remove all packing materials. Remove
the protective film (blue film) from the
Please make reading this Operation Manual your first step prior to using the appliance.
This important booklet explains exactly how the appliance works and what you need
to know to operate it successfully.
Information You Need To Know
outer cabinet.
Check the appliance for any damage,
such as misaligned or bent door, dam-
aged door gasket, broken or loose door
hinges and latches and dents inside
the cavity. If there is any damage, do
not operate the appliance and contact
your dealer or VIKING AUTHORIZED
SERVICER.
CHOOSING A LOCATION
Place the appliance on a flat and sturdy
countertop. Allow at least 3 inches on
the sides, 6 inches above the top, and
1/2 inch at the rear of the appliance for
air circulation.
GROUNDING INSTRUCTIONS
This appliance must be grounded. It is
equipped with a cord having a ground-
ing wire with a grounding plug. It must
be plugged into a wall receptacle that
is properly installed and grounded in
accordance with the National Electrical
Code and local codes and ordinances.
In the event of an electrical short circuit,
grounding reduces the risk of electric
shock by providing an escape wire for
the electric current.
ELECTRICAL REQUIREMENTS
The electrical power input requirement
should be a protected 15amp 120Vac 60
Hz electrical outlet. It is recommended
that a separate circuit serving only this
appliance be provided.
The appliance is equipped with a
3-prong grounding plug. It must be
plugged into a wall receptacle that is