VIKING GARDEN MT 4097 S, Инструкция по эксплуатации

Страница: 32 / 306

0478 192 9804 B - EN
30
Remove the cotter pin (5).
Lift the mowing deck slightly and detach it
from the front mowing deck mounting (3).
Carefully release the mowing deck.
● Repeat this procedure on the other
side.
● Carefully and slowly set down the
mowing deck.
Removing the mowing deck:
● Select the highest cutting
level. (
Ö 8.13)
Pull out the mowing deck (1) with a slight
rotary motion at the side of the deflector
flap (11).
13.2 Installing the mowing deck
● Park the machine on level and solid
ground.
● Stop the engine. ( Ö 12.3)
● Remove the ignition key.
● Engage the parking brake. ( Ö 8.12)
● Turn the wheels to the left up to the
stop.
● Carefully set the cutting height
adjustment lever to the highest cutting
level. (
Ö 8.13)
Pushing in the mowing deck:
● Position the V-belt so that it is
accessible at the opening in the V-belt
cover when the mowing deck is
installed.
Push the mowing deck (1) from the right
with the V-belt cover (6) at the front. Using
a slight rotary motion, position the mowing
deck centrally under the machine.
Attaching the mowing deck at the front:
● Select the lowest cutting level. ( Ö 8.13)
Pull the front mowing deck mounting (3)
downwards and hold.
Raise the mowing deck slightly with one
hand and insert the mounting pin on the
mowing deck into the bore on the front
Risk of injury:
Prior to all operations on the
mowing deck, carefully read and
observe the section "For your
safety". (
Ö 4.)
Risk of injury:
The cutting height adjustment lever
is under tension when the mowing
deck is detached.
Exercise particular caution when
installing the mowing deck.