VIGOUROUX Attalink-3A, Детали, особенности и регулировки

Страница: 11 / 18

11
5
4
6
NB : the illustrations below correspond to ATTALINK model 6A and may differ slightly
from other models
I- Sharpening the metal brake if the metal strip does not feed through
correctly
Sharpen the brake flat on the lower side (photo 1) and bevelled on the upper side (photo
2), with a medium grain file, taking care to remove metal filings as they appear on the blade
of the brake. To do this, start by sharpening the flat underside, and then gently work your
way to the upper side of the blade. To check how sharp the blade is, pull the metal strip
back firmly with a pair of pliers: the brake should stop the metal strip from moving back
(photo 3).
II- Changing the metal brake or the metal brake spring.
1-
Lift the brake support using a screw driver (photo 4).
IMPORTANT!!! take careful note of the position of the support in relation to the arm of the
pincer in order to be able to return it to its original position later photo 4bis).
2- Remove the 2 hub caps on the sides of the brake axis.
3- Remove the brake axis taking care with the spring which can jump out (protect your
face), and remove the brake and the spring (photo 5).
1 2 3
4 bis
A
DJUSTMENT AND
P
ART
C
HANGING