6/9
17. Install the right P4 and P6, and same way to install the left
P4 and P6. Once again, please pay attention to the position of
P4 on both sides.
Cut the Single-sided adhesive pad to fit and
stick them under the feet of P5 and P6.
18. First, two motor wires and one PWM control line on C2 are
inserted on the main control board C1, and then fastening C1
to F3.
19. Install the rear plate P7 and P8.
20. Install the synchronous belt, please fastening it at the
starting point with S4 and N2.
21. Install the synchronous belt according to the diagram
above. It shows the position of synchronous belt at central
22. Install the synchronous belt at the rear plate.
