Viglen Vig760S Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 60

Viglen Vig760S Скачать руководство пользователя страница 33

33
V1.0 Vig760S Motherboard Manual

Managing and updating BIOS

5.3.1 Introduction

There are up three methods of updating BIOS to the latest Viglen approved version.
The number of options made available for any particular board may vary depending on
BIOS Support, drive support and BIOS update file size. You only need to use one.



BIOS Updater



EZ-Flash 2 Update



BIOS recovery

Latest BIOS files and Utility are available from Viglen FTP site:

http://download.viglen.co.uk/files/Motherboards/Vig760S/Bios

NOTE: Please review the instructions distributed with the upgrade
utility before attempting a BIOS upgrade.

5.3.2 BIOS Update Instructions under DOS

The BIOS Updater allows you to update BIOS in a DOS environment. This utility also
allows you to copy the current BIOS file that you can use as a backup when the BIOS
fails or gets corrupted during the updating process.

1. Save BIOS update zipped file to a temporary directory.

2. Extract the necessary files.

3. Copy the contents of the file to a bootable USB key or CD-ROM media.

4. Boot the target PC with the device connected or inserted.

5. Select

<F8>

during POST to display the Boot Menu and select your bootable

device.

6. At the DOS prompt Type 'Flash.bat' to launch the BIOS updates process.

7. Reboot the system once complete.

8. Enter the BIOS Setup and Ensure to load the BIOS default settings to ensure

system compatibility and stability. Select the Load Optimized Defaults item under the

Exit menu.

IMPORTANT: DO NOT shutdown or reset the system while
updating the BIOS! Doing so may cause system boot failure!

«
...
31
32
33
34
35
...
»

Содержание Vig760S





























































Отзывы:

Нет отзывов