Viglen Vig760S Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 60

Viglen Vig760S Скачать руководство пользователя страница 18

18
V1.0 Vig760S Motherboard Manual

Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration

Port

Headset
2.1-
channel

4.1-channel

5.1-channel

7.1-channel

Light Blue (Rear panel) Line In

Rear Speaker
Out

Rear Speaker
Out

Rear Speaker
Out

Lime (Rear panel)

Line Out

Front
Speaker Out

Front Speaker
Out

Front Speaker
Out

Pink (Rear panel)

Mic In

Mic In

Bass/Center

Bass/Center

Lime (Front panel)

-

-

-

Side Speaker
Out

Table 5: Audio 2.1, 4.1, 5.1, or 7.1-channel configuration

NOTE: To configure a 7.1-channel audio output, use a chassis with
HD audio module in the front panel to support a 7.1-channel audio
output.

2.4.7

(7)

USB 2.0 ports.

These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices.

2.4.8

(8)

USB 3.0 ports.

These 9-pin Universal Serial Bus (USB) ports are for USB 3.0 devices.

NOTE: Due to the limitation of USB 3.0 controller, USB 3.0 devices
can only be used under Windows OS environment and after the USB
3.0 driver installation.

We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance from your USB 3.0 devices.

2.4.9

(9)

DVI-D port.

This port is for any DVI-D compatible device.

DVI-D cannot be converted to output from RGB Signal to CRT and is not compatible
with DVI-I.

2.4.10

(10)

HDMI port.

This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP
compliant allowing playback of HD DVD, Blu-ray, and other protected content.

«
...
16
17
18
19
20
...
»

Содержание Vig760S





























































Отзывы:

Нет отзывов