Viglen Vig760S Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 60

Viglen Vig760S Скачать руководство пользователя страница 12

12
V1.0 Vig760S Motherboard Manual

2.3.1

(1)

CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN).

Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.

NOTE: Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the
fan connectors! The CPU_FAN connector supports a CPU fan of
maximum 1A (12 W) fan power.

2.3.2

(2)

ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

Correctly orient the ATX power supply plugs into these connectors and push down
firmly until the connectors completely fit.

NOTE: For a fully configured system, we recommend that you use a
power supply unit (PSU) that complies with ATX 12 V Specification
2.0 (or later version) and provides a minimum power of 350 W.

2.3.3

(3)

Intel® LGA1151 CPU socket

Install Intel® LGA1151 CPU into this surface mount LGA1151 socket, which is
designed for 6th Generation Intel® Core™ i7 / i5 / i3, Pentium®, and Celeron®
processors.

2.3.4

(4)

DDR4 DIMM slots

Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR4 DIMMs into these
DIMM sockets.

2.3.5

(5)

Speaker connector (4-pin SPEAKER)

The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.

2.3.6

(6)

System panel connector (10-1 pin PANEL)

This connector supports several chassis-mounted functions.

«
...
10
11
12
13
14
...
»

Содержание Vig760S





























































Отзывы:

Нет отзывов